|
|
Build Your Online Product Catalogs?
Xinmao co***ny's snap-fire insulation tubes are made of high-purity preparation of E-glass fibers into a tube, and then processed through the tube wall coated silicone vulcanization. After curing long-term use and to maintain its softness elastic properties within -65 ¡ã C-260 ¡ã C temperature range.
The biggest advantage snap-fire insulation tubes, that is, when you install the thermal protection sleeve, no deactivation device does not require disassembly hoses and cables. Another advantage is that can be field installed at the factory to ensure the integrity and proper adaptation structure. Self-adhesive high temperature insulation fireproof glass fiber tube, inside sewn fire retardant of sticky tape, when the sleeve is adjusted to an appropriate size, you can use sticky tape closely.
Product descriptions
Self-adhesive insulation fire tube performance test:
High temperature bend test
Surface without cracking or film aging skin without stripping phenomenon after heating at a constant temperature of 260 ℃ oven for 48 hours
Low temperature folding test
After heating at a constant temperature of -70 ℃ oven for 1 hour surface without cracking or peeling produce no surface coating.
Film coated test
After continuous use by a thermostatic oven off or dissolve the test no surface phenomenon.
Flammability Test
No spontaneous combustion retardant and self-extinguishing (according to UL "VW-1" and CSA "HFS" test)
Temperature Test
(2000hr) 260 ℃ no abnormal heating tests are normal
(30sec) 1200 ℃ heating test glass fiber intact
Flame retardancy test
Burning rate of not less than 45s / 25mm --- SRG-1-7kv SRG-1-4kv, (motor insulation grade can reach higher than the H C grade)
Normal minimum dielectric breakdown voltage 7.0 kv / min 4.0 kv / min
Normal average dielectric breakdown voltage 10.0 kv / min 7.0 kv / min
The inner diameter (mm): ¦µ6mm - ¦µ130mm above specifications can be customized
Color: rust red, blue, black, gray, yellow, orange, etc., common in red.
High-temperat |
| Company: |
Ningguo Xinmao Glass Fiber Co., Ltd.
|
| Contact: |
Ms. Elena Yu |
| Address: |
Shuangjin Economic and Technological Development Zone double Eastgate 4 7 |
| Postcode: |
242300 |
| Tel: |
86-0563-4176908 |
| Fax: |
86-0563-4176007 |
| E-mail: |
|
|
|
|
Home
